anybody know where to find .adr address files for R33 GTR rom images for use in ROMEDITOR?
the boostedcruising.com site links to what they called the address files, but turned out to just be copies of the rom images.
any help is apprieciated.
*.adr files for nissan rom images
http://www.925style.com/editor_direct.html
Scroll down a bit and you'll see the link to download the .adr files. You need to get a user name/pass to download them though, which you can do for free by clicking on the link 'ROM EDITOR DOWNLOAD Authorization ID/PaSS'
Scroll down a bit and you'll see the link to download the .adr files. You need to get a user name/pass to download them though, which you can do for free by clicking on the link 'ROM EDITOR DOWNLOAD Authorization ID/PaSS'
-
dreamsOfSkylines
- Posts: 254
- Joined: Tue Dec 31, 2002 11:29 am
address files that contain the map for the raw binary info contained in the .bin files.
the .bin files are the binary data contained in the ECU's eprom chip. without the address files, the .bin data is junk. the address files tell romedit what parameters are where in the matrix.
with a eprom programmer and the romedit software, you can read and modify the ecu.
the .bin files are the binary data contained in the ECU's eprom chip. without the address files, the .bin data is junk. the address files tell romedit what parameters are where in the matrix.
with a eprom programmer and the romedit software, you can read and modify the ecu.
it gonna be a while. im gonna build the programmer soon, so thats not a problem, but my motorset/clip wont be in the works for months.
also, im not going to mess with the fuel/ignition maps directly. im using the emanage/E-01 for tuning. i only want to remove the speed limiter/raise rev limit.
ill let you know when i make the programmer, so ill bump the rev/remove speed limiter for you, and socket the ecu, but i wouldnt be comfortable modifying the maps. i wouldnt risk blowing up your motor.
also, im not going to mess with the fuel/ignition maps directly. im using the emanage/E-01 for tuning. i only want to remove the speed limiter/raise rev limit.
ill let you know when i make the programmer, so ill bump the rev/remove speed limiter for you, and socket the ecu, but i wouldnt be comfortable modifying the maps. i wouldnt risk blowing up your motor.
I was mainly interested in hearing how difficult/easy the programmer is to makeoh, ok. the schematic of the programmer on boostedcruising.com is not really straightforward. [non standard] there using a wierd schemat style for ground busses. its kinda confusing as to exactly what they mean. is it so hard to put dots in to clearify the situation?
i mean, after looking at it for two minutes, i understand it, but is it so hard to just put dots on the shcematic instead of heavy lines?
theres a seperate power supply schematic for the three voltage regulators because someone brilliant decided it was necissary to use four different voltages.
i mean, after looking at it for two minutes, i understand it, but is it so hard to just put dots on the shcematic instead of heavy lines?
theres a seperate power supply schematic for the three voltage regulators because someone brilliant decided it was necissary to use four different voltages.
see, its not complicated, but its a non-standard schematic, which is annoying.
4K7 = 4.7K [stupid] and its missing the value of one resistor in the main circuit. [the collector of transistor 7]
also, by Q7, there is a non marked component. im still trying to figure out what it is. it might be a SCR or something.
its just an outline to try. im gonna try to find a better schematic if i can. i just dont like the looks of this one.
4K7 = 4.7K [stupid] and its missing the value of one resistor in the main circuit. [the collector of transistor 7]
also, by Q7, there is a non marked component. im still trying to figure out what it is. it might be a SCR or something.
its just an outline to try. im gonna try to find a better schematic if i can. i just dont like the looks of this one.
