Addition To The Z Family

[Z32 TwinZ]

I have a 91 300z TT and know a 350z roadster. 10,000 miles on it.

Im wanting to lower it, what do yall think about some Tien H spring?

[_b.jaye_]

nice lookin Zs man!

pretty mean lookin for a roadster

congrats!

[spitalul2bad]

tinted the windows on a roadster??

[R350Zz33]

can i ask you a question i have always wondered this people with convertibles park there cars leave the top down and roll up there window. i see the all the time whats the point its not gonna stop someone from stealing ur stuff and if it rains its not gonna stop it. im jw cause i see this all the time.

[Mr. Z33]

NIce choice on the 350! How many miles are on the 300?

[Z32 TwinZ]

can i ask you a question i have always wondered this people with convertibles park there cars leave the top down and roll up there window. i see the all the time whats the point its not gonna stop someone from stealing ur stuff and if it rains its not gonna stop it. im jw cause i see this all the time.

I had just come back from a drive around town. I was driving with the windows rolled up.... You dont always have to ride with the windows rolled down...

NIce choice on the 350! How many miles are on the 300?

It has 10,000 miles on it.

[sluggoZ]

can i ask you a question i have always wondered this people with convertibles park there cars leave the top down and roll up there window. i see the all the time whats the point its not gonna stop someone from stealing ur stuff and if it rains its not gonna stop it. im jw cause i see this all the time.

When you see them parked like that is because the windows are usually up when the car is on the road....The main reason why a lot of roadsters drive with the windows up is to avoid wind interference....but what's great about the 350ZR is the rear wind deflector.....just a great improvement & no need to roll up windows while driving.....

BTW...Blacklionxx CongratZ on your new purchase!

[sluggoZ]

As far as springs, it's like a personal choice...how low do you want to go

I just got done doing some lowering research & for my taste & choice was the Hotchkis springs.Front: 9/16" 15mm dropRear: 3/4" 19mm dropThey are made from cold wound silicon steel & are linear rate & powder coated seabring silver.

Some say that I would not need a rear camber arm/toe kit because of only the 3/4" drop. If you go 1" or more drop, than it's best to have the rear camber arm/toe kit. BTW my choice for the rear kit would be SPC & then have a 4 wheel alignment done.

So after adding up all the $$$ to be spent for this lowering mod......I now decided not to lower my ZR, in time the car will drop some and I would now rather save up for a Wilwood 6/4 BBK first.Just my 2 cents worth!Good Luck with your modding!

[krash]

Your Z is looking good! IMO the ride height looks perfect with the wheels you got on there

[Z32 TwinZ]

Im wanting to go with the Tein H-Tech Springs.

Specs for the 350zr:FRONTApprox.mm inch -13 -0.51 REARApprox.mm inch -7 -0.28

[alsz]

I wouldn't drop that roadster a mm, it looks bad to the bone just the way it is. Where did you get the wheels?

[Z32 TwinZ]

There Axis Shine.

http://www.axiswheels.com/wheels.php?id=shine

[alsz]

Thanx dude, been looking for wheels for over a year

[alsz]

Are they 19x8.5 15 offset front and 19x9.5 20 offset back? I am concerned about rub and want to be sure before I drop that much coin.

[Z32 TwinZ]

Front is either:

20x9.5 or 19x9.5

Back is:

20x10

Ill check when i get home.

[R350Zz33]

can i have ur 300zx ill give u a hug

[PapaSmurf2k3]

Sweet 350!

Do you have any pictures of the 300?

[EOrdonez3229]

I agree with ALSZ and Krash. I think that ride height looks great. And YES to those rims!

I'm not usually a HUGE fan of the roadster, but your ride definitely changes my opinion. HOT

[bmike818]

Nice wheels!

[kuhan]

Front is either:

20x9.5 or 19x9.5

Back is:

20x10

Ill check when i get home.

Your rims are 20" in front and rear. I was think of getting those or super hiros w/red strip for my red Z.Also, you car sits pretty low already. but that's from the angle of the picture. Not sure if it is actually that low. I wouldn't bother with a drop if it is actually that low.

And you also own a Mercedes?

[Z32 TwinZ]

Thank you all for the complements.

Alright wheels specs:Front:20x9.5 245/35/20Rear:20x10 275/30/20

I would just like to lower about half an inch just to get rid of some wheels gap. Just a little tho.

I can show yall some pics of the 300z TT. Still needs to be lowered and a little trim touch up.Here are my 2 main post:zerothread?id=362476http://forums.nicoc ... ?id=387689

[sluggoZ]

Thanks for sharing your Z pics.

Man....what a killer Z stable!!!!!!

[R350Zz33]

i cant wait till i get my collection started.

[alsz]

Thanks for the specs. When I upgrade my wheels, I will post pics. They give the Roadster a whole different look.Complements on your 300Z as well, looks clean, nice wheels on it too. You are a Z enthusiast, very cool.

[Z32 TwinZ]

Thanks for sharing your Z pics.

Man....what a killer Z stable!!!!!!

Im not quite there yet.

[_b.jaye_]

thats effin insane.... cant have too much of a good thing i guess

[sluggoZ]

You must of made a fast remodeling job!

[Z32 TwinZ]

LOL i wish that was mine! Someone posted it in the 300zx picture thread.

[sluggoZ]

LOL i wish that was mine! Someone posted it in the 300zx picture thread.

Yeah...I was pulling your leg!The driveway gave it away......+Cool pic though!

[R350Zz33]

thats a beautiful pic