THE_ROOK_671https://forums.nicoclub.com/memberlist.php?mode=viewprofile&u=113&sid=bf47ad636a5774acadb27bde94aef451Added two more 40's to the familyWed Jun 17, 2009 5:53 pm
Postby
THE_ROOK_671 »
https://forums.nicoclub.com/the-rook-671-u129178.htmlWed Jun 17, 2009 5:53 pm
ok guys i just bought both of these for $1000.[IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG[IMG]][/IMG][IMG][/IMG][IMG][/IMG]
no cracks on the dashes for both cars. the s14 has over heating problems so the owner says. any suggestions. as for the s13 intake mani is offbought it like that so i hope nothing is missing dont really no what elseis wrong with it. my plans are to sell the s14 and use that money for myother s14 and this s13. so tell me what you guys think!
Postby
THE_ROOK_671 »
https://forums.nicoclub.com/the-rook-671-u129178.htmlThu Jun 18, 2009 5:28 am
Alright so i decided to try and get the s14 running since i know thatthe s13 will be down for quite sometime. Top the point i wanted to get some fresh oil in the s14 i was alreadygetting excited!!! then right when the oil drain plug comes off coolantcomes apouring out damn!! got excited for nothing. on with thepictures!
heres the s14[IMG][/IMG]
also i found out that the s13 had a seperate fan in the front and backof the radiator and there not the stock fans.[IMG][/IMG]
and heres the s13[IMG][/IMG]
plus how much do you think i can sell the s14 for thanks guysalso any suggestion with the blown head gasket
Postby
koukis4teen »
https://forums.nicoclub.com/koukis4teen-u131089.htmlThu Jun 18, 2009 6:13 am
yeah bad shape shell but dude both cars for 1000 you could part out and get that bakk so fast... brown HUD dash.. sum1 sumwhere will pay good money for that.. i hate the brown but that is sum1's treasure right there. lol
Postby
THE_ROOK_671 »
https://forums.nicoclub.com/the-rook-671-u129178.htmlSun Jun 21, 2009 5:24 am
alright guys for some odd reason i cant get this F************N intake manifold back on the s13. i know that when it mounts on the bottom bracket on the block its suppose to be on the inside part of the bracket. but when i do that the top plenum wont align with the two bolts on the top part of the head that stick out. If they do align and go in then the bottom partof the manifold will be on the outside of the bracket which doesnt seem righteven at that every thing will align except where the upper and bottom parts meet on the intake manifold there will be a gap on the right side where the two meet. Any suggestions or help would be nice thanks guys.