Accent light (Bat_saver) pink wire issue

[mustafaalshammari]

Hi Everyone,

I installed an under body LED strips that I bought from Amazon by following the below accent lighting installation instructions that i found online

https://www.nissan-techinfo.com/asistgc ... /1ug11.pdf


After testing, I connected them to the Pink wire (Batt_Saver) which they worked perfect when unlocking the car and open the doors.

However, they suddenly stoped working and the interior lights as well, I pulled the fuse for interior lights and found nothing wrong with it, when i put it back the interior lights starts working again but i no longer have power in the pink wire?

Any one knows where that wire is connected and is there any fuse that control it?

[VStar650CL]

It goes to the BCM. I don't have ASIST in front of me to reference the exact circuit for a '21, but hopefully it's a "smart FET" implementation which can be brought back to life by clearing the short or overload (whatever it is) and clearing the BCM codes. If it's like the gen2's then a dead Power Saver means a new BCM.

[mustafaalshammari]

Thank you for your reply, Is there any way I can get to it and check it, or it has to be done by a mechanic?

[VStar650CL]

You need a scanner that can read the BCM. High end stuff, cheap scammers won't do it.