About to replace tension rods...

ONLY for ADVANCED technical discussion about the 240sx!
Post Reply
User avatar
Spectre
Posts: 1532
Joined: Thu Jul 25, 2002 9:17 pm
Car: 1995 240sx se

Post

Well my service manual just came in, so I'm going to order some new tension rods with poly bushings from pdm. Is there anything else that I may want to replace while I'm at it?

Top
User avatar
Spectre
Posts: 1532
Joined: Thu Jul 25, 2002 9:17 pm
Car: 1995 240sx se

Post

Gee, thanx for all the suggestions:thumbup.
Top
Nismo_Freak
Posts: 11665
Joined: Wed Jul 24, 2002 10:42 pm
Car: 89 240SX

Post

No not really ... the tension rods are easy to replace. 3 bolts per rod and they come off... the bolts are always tighter than hell on those since its suspension and they tend to get tighter the longer they are on there. I will be doing this shortly ... I did it once before but with Nissan replacements.
Top
lost93
Posts: 36
Joined: Thu Jul 25, 2002 8:45 am

Post

no its easy but the the bolts are on tight as hell if you can find someone with a press then just the bushings :)
Top
User avatar
Spectre
Posts: 1532
Joined: Thu Jul 25, 2002 9:17 pm
Car: 1995 240sx se

Post

cool, thanx. :cool:
Top
Post Reply

Return to “240SX Technical Forum”

Search for Nissan stuff on ebay!

Find Your Forum!

 

NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan or Infiniti.

Information Copyright © 2000-2024 by NICOclub, all rights reserved. Material may not be copied or reprinted without written permission.

Privacy Policy