Aargh...dropped screw into trunk lid

All things Altima Coupe.
kruuth
Posts: 251
Joined: Sat May 10, 2003 7:12 pm

Post

I have something installed in my trunk and last night I had to remove it...one of the screws fell into that area in the trunk lid. I need to fish out the screw. I'd like some suggestions on how to get in there. I can hear it rattling but can't seem to get to it. Ideas?


User avatar
DJ_B_Easy
Posts: 3593
Joined: Tue Jan 19, 2010 3:16 pm
Car: 2017 GMC Sierra All Terrain X
Location: NJ

Post

Just pull off the liner, it comes right off. Unless Im not following. Pic would help.

kruuth
Posts: 251
Joined: Sat May 10, 2003 7:12 pm

Post

that's not the problem. It's in between the metal sheets behind the liner.

User avatar
DJ_B_Easy
Posts: 3593
Joined: Tue Jan 19, 2010 3:16 pm
Car: 2017 GMC Sierra All Terrain X
Location: NJ

Post

Gotcha. In that case get one of those retractable magnets and shove it in there. Or take the lid off and start shaking.

kruuth
Posts: 251
Joined: Sat May 10, 2003 7:12 pm

Post

Taking lid off is not an option. I've only got one good hand. Isn't the lid magnetic?

User avatar
headhunt3r
Posts: 867
Joined: Sun May 04, 2008 6:45 pm
Car: Altima Coupe 2.5S w/ CVT
Location: Vancouver BC

Post

I did the same thing once. Took a hanger, and stuck a piece of gum at the end, then carefully tried to fish it out with that.

Good luck.

kruuth
Posts: 251
Joined: Sat May 10, 2003 7:12 pm

Post

Problem is I can't readily find where it is....I know it's in there

User avatar
DJ_B_Easy
Posts: 3593
Joined: Tue Jan 19, 2010 3:16 pm
Car: 2017 GMC Sierra All Terrain X
Location: NJ

Post

Go buy this...

Image

Coupe12
Posts: 309
Joined: Sat Oct 16, 2010 9:15 pm
Car: Nissan altima coupe. 2008, 2.5S
Location: Ripley TN

Post

I dropped my hex key set in the engine bay one time.......... Just drove around slowly until it fell out


Return to “Altima Coupe (2008-2013)”