A/T to M/T reverse light answer

ONLY for ADVANCED technical discussion about the 240sx!
JustinM
Posts: 108
Joined: Thu Aug 28, 2003 3:44 pm
Car: music (live)

Post

S13 only. That cluster of wires going to the gear sensor switch on the automatic, ditch it all except the green and black wires. The green wire is green with a white stripe on the clip going to the fuse box under the hood, from the clip down to the transmission it is only green. Run it down to your new manual transmission and splice it into the front sensor which has two black wires. There you go, reverse lights. You can find the right sensor on any car by checking the ohms with a voltmeter. If you don't have one, buy one. Put the shifter in reverse and touch the leads until you find the one with 0 ohms. then put the shifter in nuetral and make sure the ohms go infinite and your set.:ylsuper Justin


Return to “240SX Technical Forum”