OK guys, I know there are lots of threads about tires here, I have a simple yes/no question:

Will 225/60/17's fit on the 04 sedan w/o rubbing? YES NO

Do you know this from fact or are you making your answer up? Fact Fiction


Modified by Infiniti Chica at 5:23 AM 4/12/2008

YES

Infiniti Chica wrote:Do you know this from fact or are you making your answer up? Fact Fiction

hehehehe... That's perfect. Absolutely perfect. (sig material?) PS. I'd call TireRack and ask them.

this is internet....we make sh** up !!!

I would also check http://www.miata.net/garage/tirecalc.html

last thing you want is it causing damage to your bi-lateral connuter valve!!

It would fit, but its too tall compared to oem specs. It is 4.75% too slow. It is not recommended to go above a 3% difference. So I say don't waste your time.

RED_DET wrote:It would fit, but its too tall compared to oem specs. It is 4.75% too slow. It is not recommended to go above a 3% difference. So I say don't waste your time.

was thinking the same w/the 60's, but thought she should check out the tire calc for herself. It's a cool tool

SVTCOBRA wrote:this is internet....we make sh** up !!!

last thing you want is it causing damage to your bi-lateral connuter valve!!

On the G35 the connuter valve has been integrated into the fozzups cluster bus bar. They no longer use the bi-lateral ones, instead, they now come in lefts and rights.

They come in light blue for 2007 up.

rn79870 wrote:
On the G35 the connuter valve has been integrated into the fozzups cluster bus bar. They no longer use the bi-lateral ones, instead, they now come in lefts and rights.

They come in light blue for 2007 up.

Thanks for clearing that up Bob!! I feel like such a noob!!

SVTCOBRA wrote:
Thanks for clearing that up Bob!! I feel like such a noob!!

I thought the connuter valve was connected to the Amphenol Alden PL-700 Series with the Pulse-Lok, which is designed to have auto-latch mating action which confirms that connector pairs are fully engaged between tire rotational force and rear differential ratios. The connuter valve, of course, offers convenience and functionality of a standard RJ-45 connector, which also features multiple termination options, positive confirmation of engagement and 1-to 7-pole configurations for optimal centrifugal force when tire rotation exceeds 760 revolutions per mile.

In Spanish we would call you guys "pendejos" which speaks to your raw brilliance!

rn79870 wrote:
On the G35 the connuter valve has been integrated into the fozzups cluster bus bar. They no longer use the bi-lateral ones, instead, they now come in lefts and rights.

They come in light blue for 2007 up.

The light blue ones, especially the ones for the 07, have fiber optic EC series cables that are either single or multi-mode assemblies. Since the 04 ones meet TIA/EIA and IEC intermateablity standards, have a temperature range of -20°C to +75°C, and are 100% optically tested, will they not work just as well as the 07 ones? "Pendejo!"

I have a set of connuter valves for I'd let go for cheap. These are the Px-1493 designation instead of the more common Px-1393's. They use Fiber-lock plugs instead of the generic RJ-45's and resist corrosion far better.

audtatious wrote:I have a set of connuter valves for I'd let go for cheap. These are the Px-1493 designation instead of the more common Px-1393's. They use Fiber-lock plugs instead of the generic RJ-45's and resist corrosion far better.

How much? The Px-1493's are not as efficient as the The Metri-Pack connectors which are ideal for sealed and unsealed applications. The systems which utilizes internationally standardized male blade sizes allowing for flexibility in design were not introduced until 2006, the 1493's may be dated.

So now that a few of you have had your fun with the new girl, any other bright ideas or should we keep playing the "who's more pendejo," game? Keep in mind that in law school we learned to play with the big boys too and in federal court we, as women, have to be 2-3 times more competent than a male attorney to get any respect. Papa didn't raise no fool!
Modified by Infiniti Chica at 6:29 PM 4/12/2008

what more bright ideas do you want? i already said those tire sizes would not work.

RED_DET wrote:what more bright ideas do you want? i already said those tire sizes would not work.

Sorry, comment was not directed at you but at 2-3 of the guys who insisted on playing childish games. Your input is appreciated- thanks!

That's ok chica, you know more than me! I just drive 'em really freaking fast! I could probably use your services one of these days! lol

Childish games............. I thought that was freaking hilarious. Chica, you rolled right with the punches. I didn't think it was directed to you for being a woman at all just a punch of "pendejos" goofing around.

Infiniti Chica wrote:
Sorry, comment was not directed at you but at 2-3 of the guys who insisted on playing childish games. Your input is appreciated- thanks!

Sorry, comments were not directed at you!! (note to self - large chip on shoulder - stay out of the "attorney" 's threads) Childish Games??? Here???

Hi! and welcome to NICO!!! I see this thread is among some of your first posts, so Welcome! As far as gettin picked on....no worries!!! It doesn't matter if your a guy or girl, we just tend to mess with the noobies a little here....especially when they set themselves up a little bit by calling everyone out, like you did I wish I was in PA!, I'd have to ask if you could meet up and I could buy a cerveza for your pinche abogada pendeja

**braces self for return comment**

Raylo wrote:Childish games............. I thought that was freaking hilarious. Chica, you rolled right with the punches. I didn't think it was directed to you for being a woman at all just a punch of "pendejos" goofing around.

All in good fun, just thot to throw back a little to heighten the game. No harm done.

SVTCOBRA wrote:
Sorry, comments were not directed at you!! (note to self - large chip on shoulder - stay out of the "attorney" 's threads) Childish Games??? Here???

Glad I could help you identify the chip on your shoulder, and I'm not even an analyst-- imagine if I was.

USAF_G35_Guy wrote:Hi! and welcome to NICO!!! I see this thread is among some of your first posts, so Welcome! As far as gettin picked on....no worries!!! It doesn't matter if your a guy or girl, we just tend to mess with the noobies a little here....especially when they set themselves up a little bit by calling everyone out, like you did I wish I was in PA!, I'd have to ask if you could meet up and I could buy a cerveza for your pinche abogada pendeja

**braces self for return comment**

Not sure I can return this one--- I think you crossed the line very seriously here.

^Wow....I think you do need a beer and learn to roll with the punches.

**note to self, follow SVT's lead and stay out of the lawyer's threads**

CYA! BYE BYE NOW!

.....BUT YA! THEY'LL RUB!!! GO SMALLER!!!

USAF_G35_Guy wrote:^Wow....I think you do need a beer and learn to roll with the punches.

**note to self, follow SVT's lead and stay out of the lawyer's threads**

CYA! BYE BYE NOW!

.....BUT YA! THEY'LL RUB!!! GO SMALLER!!!

OK-- so they'll rub.

That's all I needed to know really. The beer- yo no tomo cerveza!

No need to fear my threads guys, I'm actually quite small (5'4, 116lbs), fairly harmless. quick and even funny at times, do like to toss out a light insult or poke on occasion, can take a very good punch and deliver one pretty well if need be.

I wanted to know if 245 40 18's will fit on my 08 G XS (225 50 18). I was told that if the wheel is 8 inches wide , no problem.

I am being serious here, "gentlemen".

*flame suit on*

245-40-18's will absolutely fit a G with no issues.

Infiniti Chica wrote:
How much? The Px-1493's are not as efficient as the The Metri-Pack connectors which are ideal for sealed and unsealed applications. The systems which utilizes internationally standardized male blade sizes allowing for flexibility in design were not introduced until 2006, the 1493's may be dated.

Sorry, but anything attached via RJ45 stands no chance against fibre channel

Infiniti Chica wrote:Sorry, comment was not directed at you but at 2-3 of the guys who insisted on playing childish games. Your input is appreciated- thanks!

Us older people have nothing to do but play childish games.

Your question was answered. 60-series will fit and with them your speedometer will be off and your car will have worse cornering capabilities. As a positive, you will have more cushion when hitting pot holes .

Infiniti Chica wrote:So now that a few of you have had your fun with the new girl, any other bright ideas or should we keep playing the "who's more pendejo," game? Keep in mind that in law school we learned to play with the big boys too and in federal court we, as women, have to be 2-3 times more competent than a male attorney to get any respect. Papa didn't raise no fool!

Modified by Infiniti Chica at 6:29 PM 4/12/2008

Whoa, I'm gonna be much more careful around you IC. However, I'm patient and persistent.

In Peru´s slang, pendejo describes a smart guy with few or no scruples.

(btw, you passed, welcome to NICO)

I might suggest you step up to the real test...located here...and see how much better you do than we did.

zerothread/329425

SVTCOBRA wrote:
Sorry, comments were not directed at you!! (note to self - large chip on shoulder - stay out of the "attorney" 's threads) Childish Games??? Here???

So Rich, is your voice, like mine, a few octaves higher this morning?

rn79870 wrote:
Whoa, I'm gonna be much more careful around you IC. However, I'm patient and persistent.

In Peru´s slang, pendejo describes a smart guy with few or no scruples.

(btw, you passed, welcome to NICO)

I might suggest you step up to the real test...located here...and see how much better you do than we did.

zerothread/329425

:

In MX, and the southwest, pendejo means idiot.... I see we have a linguistic misunderstanding and I stand corrected (although I see myself as having scruples and integrity--- not all of us are slimey)-- mia culpa, mia culpa! bowdown


Modified by Infiniti Chica at 3:59 PM 4/13/2008

rn79870 wrote:
So Rich, is your voice, like mine, a few octaves higher this morning?

Nothing like being de-badged (or is that emasculated) so soon. Like I said, I'm harmless!