A really easy question for you....I think

[Turbo_Nismo_EC]

OK, I have a 95 Nissan H-Body. How do I set the idle? The idle screw on the ECU is turned all that way down and my truck still idles at about 1000-1100 rpm. How do I idle it down some? Oh yeah, it's a 4-cylinder, manual transmission, 2wd. Thanks:help

[Turbo_Nismo_EC]

what? nobody knows this one? I figured if anybody would know it would be someone in here. Oh well

[drjohn]

Run the eng. to op. temp.and run at 2000 rpm for a couple min. Let idle about a min. then turn it off and disconnect the tps sensor. Restart eng. and race to 2000 rpm a couple of times. Check to make sure the timing is at 10 deg. for a/t or man. then set idle speed at iacv valve on the side of the throttle body on injector side.There are 2 solenoids and at the top is a cylinder with a cap in it .Remove the cap and adjust idle. When done shut eng. off and reconnect tps. Restart and check idle.