A-Pillar removal on 2007 m35

Forum for Infiniti M35 and M45, and Nissan Fuga owners.
jbeng88
Posts: 2
Joined: Mon Dec 14, 2009 5:02 pm
Car: 2007 infinit M35X

Post

Anybody know how to remove the A-Pillar Garnish on the Drivers Side of a 2007 Infiniti M35X?


patmcd06
Posts: 24
Joined: Thu Nov 07, 2013 6:14 pm
Car: 2007 M35x

Post

I know this is an old post, but I need to remove my A-pillar garnish. Does anyone know to remove it safely??

User avatar
WillV
Posts: 155
Joined: Fri May 06, 2016 10:21 am
Car: 2006 M35 Moonlight White/Tan Interior
Location: Florida

Post

Have you checked Ilya's how to/FAQ page? I don't know if it's there, but it's a good place to start while waiting for someone to respond. Lots of info there.

User avatar
Ilya
Moderator
Posts: 9205
Joined: Fri Apr 23, 2010 11:20 pm
Car: 2011 M56x but I spend a lot of time on my 2015 Kawasaki Vulcan S. Former owner of a 2007 M35x. Also take care of my wife's 2016 QX60.
Location: Charlotte, NC
Contact:

Post

Pat, you may want to use the FAQ thread to get the Factory Service Manual. I'm sure the steps to remove it is in there.

User avatar
WillV
Posts: 155
Joined: Fri May 06, 2016 10:21 am
Car: 2006 M35 Moonlight White/Tan Interior
Location: Florida

Post

Ilya wrote:Pat, you may want to use the FAQ thread to get the Factory Service Manual. I'm sure the steps to remove it is in there.
Aha! Knew it! :biggrin: :woot: lol

Larz
Moderator
Posts: 2894
Joined: Thu Feb 21, 2013 8:55 pm
Car: 2019 Q70-L RWD
Location: Ft Lauderdale, Florida
Contact:

Post

I removed my A-pillars to re-cover my dash. I grabbed them and twisted them back and forth. They un-clipped without much force. After they loosen, just pull them towards the center from the top down.


Return to “Infiniti M35 and M45 Forum”