a.c. on sr swap <searched>

Post by **180sxmonster** » Thu May 25, 2006 7:28 pm

okay, so i have the sr engine in and while putting everything together...ive come to a problem....the ka a.c. compressor wont bolt up....okay ive too searched and everyone says what heavythrottle says too.

compressor should bolt up with 2 of 4 bolts.

my compressor will bolt up, just one bolt, but not even near to where the belt can drive it.. any help will be good...

also its a s14 sr into an s13 chasis....help

Post by **vutony** » Thu May 25, 2006 10:01 pm

yup...u need an ac compressor from a sr or make custom brackets.....

Post by **highmilehatch** » Fri May 26, 2006 1:07 am

You can make it work. I have an S14 SR with a 95 KA compressor. Drill new holes in the bracket and tap them. Or you can just purchase an S14 SR compressor.

Post by **180sxmonster** » Fri May 26, 2006 2:39 pm

i bought the front clip and have everything including the compressor too but the reason is is that my ac from the ka is so cold...<imgoing to miss it> or itll come back for about $200 bucks. sucks man...thanks.

also when i searched about the motors....no one mention about ac problem or wiring problem that differs from the redtop...i would of save a bunch.

a.c. on sr swap <searched>

a.c. on sr swap <searched>

Re: (vutony)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums