A/C in an S13 with a VH45DE???

Discuss topics related to the VH41DE, VH45DE, VK45DE, and VK56DE engines.
User avatar
Steve Lloyd
Posts: 490
Joined: Sat Jan 14, 2006 8:24 am

Post

Is there room for the compressor or would it require a lot of fabrication. I know I need to notch the frame rail to fit the alternator, that's why I'm worried about fitting the AC compressor.

I know I will need custom lines and that's not a problem, I'm just concerned about fitting the compressor in there.

This is for my DD and I live in Florida, so AC is a must.

Thanks..........


Nismo240sx1226
Posts: 4
Joined: Fri Jul 09, 2004 10:17 pm

Post

if you were to run a top mount alternator there might be enough space to stuff the A/C compressor down there, then again a smaller compressor from some fwd nissan might fit better............but who knows?

User avatar
elwesso
Posts: 30810
Joined: Sun Feb 23, 2003 4:52 pm
Car: 94 Infiniti Q45t 5 spd
2007 BMW M Coupe
2007 Infiniti G35 S 6MT
Location: Indiana
Contact:

Post

You would have to do some pretty extreme trickery to get it to work. For sure I dont think you could have all the stock accessories (PS, Alternator, and AC) in their stock locations...

Might be easier to rig up some electric compressor...

User avatar
Carl H
Posts: 5985
Joined: Mon Aug 04, 2003 4:09 am
Car: 1995 Nissan 240SX SE RB30DET

Post

will not fit unless you remove the tc rod and most of the frame rail...you'll have to reconfigure the engine accessory system to support it in an s13.

User avatar
piranhamatt
Posts: 48
Joined: Mon Mar 23, 2009 7:43 am
Location: Cincinnati, OH

Post

I hate to threadjack, but is it pretty much the same situation in an s14?


Return to “VH45DE / VK45DE / VK56DE Forum”