A/C help --ka24e to ka24de

[FlipCoupe]

Well I'm looking at my coupe and although I know 240's aren't know for being comfortable, but I'm trying to make mine as comfortable of a DD as I can. With that being said im tying to find A/C parts to put into this thing. Its going from the KA24E to the KA24DE and I'm just trying to figure out what I can reuse off the ka24e and what i need to buy new.

Looks like i can just modify the bracket on the SOHC compressor but that's as far as I've gotten.


Any help is appreciated

[JoseBronx]

would also like to know...

[AZ89two4Tsx]

The lines should be pretty close. You might have to get one or two custom made. Might have to anyways as oem lines are getting old, and make sure you're thinking about what freon you're going to use. Get some new o-rings.

The condensor will work.

Blower motor/under dash stuff will work.

Dryer will be the same. I'm pretty sure the location is the same, but don't quote me on it.

The only other thing I can think of would be the harness connector to the compressor. You might have to splice/extend the wire, but that's no big deal either.

[s13sickboi]

the a/c compressor will not fit with the p/s pump, just a lil fact there. im ditching my p/s though, so my compessor will fit, and i wont have to worry about finding and swapping lines!

[FlipCoupe]

the a/c compressor will not fit with the p/s pump, just a lil fact there. im ditching my p/s though, so my compessor will fit, and i wont have to worry about finding and swapping lines!

yeh i've come to terms with the fact i wont have power steering ^^

[FlipCoupe]

the a/c compressor will not fit with the p/s pump, just a lil fact there. im ditching my p/s though, so my compessor will fit, and i wont have to worry about finding and swapping lines!

single cam lines will fit on the twin cam?