97 xe 4cyl need ignition resistor part #

Forum for the Xterra, Frontier and Hardbody, the smaller workhorses of the Nissan lineup!
User avatar
jonathan1173
Posts: 75
Joined: Wed Nov 04, 2009 2:09 am
Car: 1997 Nissan Pickup XE 4X2
Location: Houston

Post

1997 Nissan put xe 4cyl. Need part number for the 2.2 ohn resistor located alongside the valve cover. Code p1320, primary ignition signal.
Replaced 3 distributors, one a genuine Nissan one. Changed crank position sensor way in the back by firewall. Resistor has no continuity on the blue wire going to 2pin connector on the distributor. Resistor showing 0.3 ohms. Only part I havent replaced so for $20 it's worth a shot.


whomadewho
Posts: 523
Joined: Mon Aug 02, 2010 9:32 pm
Car: 1997 Nissan pickup

Post

The part number for the resistor/condenser- 24336M. Or - 24336-C9901. This is for the resistor taped on the wire harness located on the passenger side rocker arm cover. Hope this works.

User avatar
jonathan1173
Posts: 75
Joined: Wed Nov 04, 2009 2:09 am
Car: 1997 Nissan Pickup XE 4X2
Location: Houston

Post

Thanks! I've ordered the part.


Return to “Nissan Trucks Forum”