97 ka auto to KA manual swap...trans.

[Level2]

Im having a problem locating a 97 manual transmission. Im not sure but isnt the 95 through 98 manual transmission the same setup?If so then ill use that one. About how much should they charge for that anyway? It should fit right on to the egine ....right?:help

[Repo Man]

You shouldn't have a problem. The drivetrain is the same, but remember in '96 it went to OBDII. As far as I know that does not affect the transmission and I think the gear ratios are the same.

You could email 95silviase. He just did an auto to manual swap not too long ago. Also 574-240sx (I think that's his s/n, he's from Granger, IN-Nick) has done it personally.

[yellow_jacket]

The only reason it affects the transmission, is that the OBDII cars have a crankshaft position sensor mounted on the bellhousing. You need that sensor. Especially if you plan on passing emissions.

[MikeMurphy]

Some 95s came with OBDII as well. Dont count them out.

[Altiman94]

Well I would say try to find a 97 transmission if that's at all possible. Considering that a '97 model year car wasn't that long ago, it may be hard to find a transmission for it. Best of luck though.

[gmckey]

contact me via aim: gmckey09

I recently did the swap on my 98 240sx.

I can help you with anything you might need to know.

[FatmanRacing]

I have done the swap personally as well on a 95, IIRC the 95 I had also had the crank position sensor as well. Anyhow, technically its only to detect misfire conditions to tell the ECU which cylinder is misfiring.

95-98 transmissions are interchangeable.

if you need any help AIM: awdsr20detpulsar or fatmanracing1

[Car_crazy84]

contact me via aim: gmckey09

I recently did the swap on my 98 240sx.

I can help you with anything you might need to know.

yo man i am doing a swap on my 95 240sx. what do i need like all the parts? how hard is it? i was about to get 96 transmission but i never had enough money. What is OBDII is that over drive or something??