'96 S14 17x9 +20mm fit?

[Mr.Pickles]

I have a totally stock '96 240sx 4-lug. Will 17x9 +20mm wheels fit OK on the S14 without having to roll the fenders and not rub against strut in the front?

Oh ya, and what tires should I run with? like 235/45 R17 or 245/45 R17

[AmoebAssassin]

You really should roll your fenders, it's easy, cheap, and it makes your wheel fitment 100x better.

It's not hard, I did it myself with a fender roller in one night (you can do it with a baseball bat as well, it's cheaper and comes out just as good!)

As far as your sizing, 17x9+20 will be sunken in the rear if you are low on an S14. The front will fit fine and will clear struts.

[adrianfromthecastle]

It's not hard, I did it myself with a fender roller in one night (you can do it with a baseball bat as well, it's cheaper and comes out just as good!)

I actually like the hammer method as opposed to the baseball bat method

btw, I'm not too sure, but I think 17x9 +20 will rub up front if you have coils

[yokota180sx]

9 +20 shouldnt rub, unless you havea ****ton of camber

IMO perfect on n s14 is +15 front rear on a 9/10

so it should look Fine and fit finemake sure the face will clear your brakes if you have other than OEm

[adrianfromthecastle]

o wait... I was thinking of something else... >_<

[Mr.Pickles]

does any have any pics with something similar offsets and width? Why would the rear look sunken with 20mm offset?

[MicroMNky]

I just got a set of 17x9 +15's, as soon as I get some tires on em, Ill post up some pictures for ya. Thats about as close as a reference i think you can get lol

[supreamS14]

http://cgi.ebay.com/ebaymotors/17-NZO-M ... dZViewItem

any1 run these?

[sr20power]

does any have any pics with something similar offsets and width? Why would the rear look sunken with 20mm offset?

Hope this helps....17x9 +35 225/45 w/ -1 degree camber now use your imagination for a +25

[Bosrudorfer]

btw, I'm not too sure, but I think 17x9 +20 will rub up front if you have coils

nope, mine are fine

[Darius]

I have 9 +24 up front and they clear my coils by about 7 mm. +20 will give you about 11 mm. As for rubbing, just raise your chassis unless you're looking to tuck them under the fender. +20 definitely needs a roll and slight pull depending on how much you want to tuck.