96 240sx swap to sr20 Drive shaft???

ONLY for ADVANCED technical discussion about the 240sx!
Citystars136
Posts: 1
Joined: Sat Nov 12, 2005 7:34 am
Car: 1996 240sx

Post

Does the drive shaft have to be changed for the swap???? OR can i use the orginal one??


The Mic
Posts: 5871
Joined: Sat Dec 21, 2002 6:33 am
Car: 3Z Wmb
Contact:

Post

You can use the original one.

The Mic
Posts: 5871
Joined: Sat Dec 21, 2002 6:33 am
Car: 3Z Wmb
Contact:

Post

Also, don't forget to remove the dust boot from the KA transmission to use on the SR20's. The KA dust boot is a thin metal ring, carefully pry this out. The SR dust boot is a thicker rubber ring but will not clear the KA driveshaft. To install the KA dust boot on the SR transmission, lay a piece of wood across the boot and work it in evenly with a hammer.


Return to “240SX Technical Forum”