95240sx auto to manual swap/ speed sensor improperly reading

ONLY for ADVANCED technical discussion about the 240sx!
vasilvia
Posts: 11
Joined: Wed Feb 22, 2006 7:10 pm
Car: 95 nissan 240sx

Post

The speedo is reading 120mph at around 50mph... What would cause this problem? I did the transmission swap and everything else is working fine. I am still using an auto ecu however because its already been tuned by jim wolf technology.


StuntingShaggy
Posts: 75
Joined: Tue Sep 19, 2006 2:25 pm
Car: 1991 240sx

Post

Who gives a ****?

I've been running my s13 without a speedo for almost a year and it's never bothered me. Only p****** have speedos.

otterball21
Posts: 161
Joined: Fri Dec 23, 2005 7:24 am
Car: 1995 240sx

Post

hey bud.. you figure it out yet?

User avatar
okinawa drift
Posts: 1711
Joined: Sun Apr 08, 2007 6:20 pm
Car: 89 240sx SOHCoupe
Contact:

Post

StuntingShaggy wrote:Who gives a ****?

I've been running my s13 without a speedo for almost a year and it's never bothered me. Only p****** have speedos.

snowdrift240
Posts: 2
Joined: Mon Apr 23, 2007 4:33 pm
Car: 95' 240sx

Post

I just completed my auto to manual swap and I have this same exact problem. I have a 95' 240SX non ABS but I am using the manaul trans ECU.

Could it be the wrong speed sensor or ECU? I bought the computer on EBAY so it might not be for a 95. It just says S14 on it so it could be 96-98(Not sure if there is a difference?). It's not that big of a deal but I was hoping for a legal smog! Has any one seen this?

MAGILLA
Posts: 119
Joined: Tue Oct 11, 2005 9:07 am
Car: 95' 240 se

Post

what year is the transmission? if it is before 95 then you need get the correct speed sensor

snowdrift240
Posts: 2
Joined: Mon Apr 23, 2007 4:33 pm
Car: 95' 240sx

Post

I'm not sure the transmission year but it does have the Crank Position sensor so I assume it's a 95 or newer. I bought a new 95 speed sensor and it's doing the same thing (speedometer reading double). I'm now thoroughly confused!!!

Modified by snowdrift240 at 7:42 PM 6/1/2007
Modified by snowdrift240 at 2:56 PM 6/2/2007


Return to “240SX Technical Forum”