95 Q45 valve cover removal problems.
-
mdkcrf250r
- Posts: 6
- Joined: Wed Jun 01, 2011 7:49 pm
- Car: 1995 Infiniti Q45
95 Q45 valve cover removal problems.
I'm replacing the valve cover gaskets so I started with the passenger side vc first. I have all the bolts/nuts removed, I can lift the valve cover off but there is too much stuff in the way to get it out. Anyone have any suggestions on what needs to be removed to get it out of there? Or perhaps a step by step guide with pics? The AC line and ABS actuator seem to be the most in the way.
-
maxnix
- Posts: 22627
- Joined: Mon Jul 22, 2002 8:11 pm
- Car: 1995 Infiniti Q45
1995 Infiniti Q45t
2000 Infiniti Q45
Re: 95 Q45 valve cover removal problems.
Yes, there are several tutorials either here, Infiniti Online Mechanic or General Chat.
Those two items, while bothersome, do not interfere with removing the VC. PS is most difficult.
Those two items, while bothersome, do not interfere with removing the VC. PS is most difficult.
-
Q451990
- Moderator
- Posts: 11030
- Joined: Tue Jul 23, 2002 8:21 am
- Car: 1990 Q45 - 118K, 2022 Toyota 4 Runner, 2004 Frontier M/T - 108K, 2012 Xterra (Mom's), 2023 Rogue (Inlaws)
- Location: Columbia, SC
- Contact:
Re: 95 Q45 valve cover removal problems.
I'm assuming you pulled the fuel lines?
Heath
Heath
-
kevindanielk
- Posts: 149
- Joined: Mon Jun 19, 2006 4:52 am
- Car: 1995 Q45 Stock, except for the blues.
- Location: LI, NY
Re: 95 Q45 valve cover removal problems.
Also all the ignition coils and their wiring, under the coil cover, must be removed.