95+head on a 89-91 block

[jbracy7]

has any one ever thought about a 95+ sr20 head on a same year ka24de the reason i ask is i have a couple of sr20 heads from some 200sxs and some ka24 blocks. and othr than bolt patterns and some size diffance seams dawm close -1/8 of an inch. it should be kinda hard to fab an andapter plate out of some 1/8 sheet of steel i got one a hell of a drill press and a good amout of fab work uder my belt and they are free parts . would any bodie have any input on if all this is posible it seems simple but ........ would it make power ..........would there be rise displacement over astock sr20 any info is goodinfo

a.tx

Modified by jbracy7 at 11:17 PM 1/13/2007

Modified by jbracy7 at 11:19 PM 1/13/2007
Modified by jbracy7 at 11:23 PM 1/13/2007

[rogoman]

Will not work. The SR and the KA are entirely different blocks.

[ISUJinX]

Yup. You'll have to drill into water passages to get the SR head to work... so No-go. You can drop a DE head on an E block, or use E pistons in a DE to raise compression for a N/A beast :-D