95 2.0 problems

[bruzzi401]

95 2.0 200 sx dropped A NEW MOTOR IN CAN NOT GET TO RUN ENGINE NOT FULLY PUT TOGETHER NO BELTS OR RAD RUNS OFF A BATTERY PACK DONT WANNA PUT TOGETHER UNTIL I GET IT TO AT LEAST IDLE ...OR WOULD IT BE BETTER TO PUT FULLY BAKK TOGETHER JUS WONDERING I SWITCH CAMS JAPAN SPEC CUZ 95 HAS DIFFERENT CAMS DUE TO EMISSIONSEVERYTHINGS TIGHT ON THE ENGINE ALL THE LINES ARE HOOKED AND THE EGR VALVE ON THE INTAKE IS BLOCKED OFF NE THING I MISSED OR CHECKED OUT

[snwbrdr435]

in before the move? ib4tm

[nametakennow]

Go ahead and put everything else on and go from there.

[JeremyNissan]

double check the obvious. Make sure fuel lines are hooked up correctly. Make sure you have all sensors plugged in and start checking for spark and fuel.

Get a can of starting fluid and spray a lil bit in the intake after the maf and try starting it. If it starts on starting fluid you may have a fuel delivery problem.