94 Q45a::New battery install disabled power windows, locks..

A Q45 forum / Cima forum for the President of Infiniti's lineup. Brought to you by Infiniti Parts USA, your OEM source for Q45 parts!
User avatar
breichert
Posts: 85
Joined: Fri Jun 02, 2006 6:11 am
Car: 1994 Q45a
Location: Scottsdale

Post

RATS.

She starts great now; however, after driving off as dumb as happy from WalMart with a newly installed battery, I didn't realize till a mile later that now my power windows, locks and mirrors won't work!

Is there a reset of some kind or is this a complicated garage fix?

Thanks in advance for your replies and advice!

HAPPY NEW YEAR NICO.


kevindanielk
Posts: 149
Joined: Mon Jun 19, 2006 4:52 am
Car: 1995 Q45 Stock, except for the blues.
Location: LI, NY

Post

Sounds like all three of those non-working systems might be on a common fuse, a large one, under the hood. Check them all, even the little ones under the dash, before giving in to a garage fix.

User avatar
breichert
Posts: 85
Joined: Fri Jun 02, 2006 6:11 am
Car: 1994 Q45a
Location: Scottsdale

Post

Checked the little ones -they appear just fine; however, where to look for under the hood for a common fuse, a.k.a. BIGGIE?

Thanks for the tips here!

User avatar
goody90q45
Posts: 3679
Joined: Wed Aug 17, 2005 2:07 pm
Car: 1992 Infiniti Q45 (sold)
Location: Orangevale, CA

Post

I'm no electrical guru but It looks like they all tie in to the body control module. Go back to the passenger compartment fuse box and take a look at the 10 amp fuse labeled BCM. Maybe even swap it out with another 10 amp fuse from a different location. There's also a couple of circuit breakers and fuses in the schematic but the BCM fuse controls it all.

Wiring diagrams start on page EL-108 of the FSM. I linked to the 95 FSM only because it has an index and is easier to use. Your 94 will be the same.

http://www.nicoclub.com/FSM/Q45/1995_Q4 ... Q45/el.pdf


Return to “Q45 Forum / Cima Forum”