94 Q45 injector #7, and seat slider problem? Help!

[brette10]

!994 Q45 #7 injector is (open) ohm, can it be replaced with out removing plenum?

Also the drivers seat was working fine, then lights started flashing on 1,2 switches next to set button, now seat will not slide bac k or forward, but all other motors work, help?

[Chally]

Both Rear & Both Front injectors can be replaced without removing maniflod.Seat??? Go to someone with a Consult or a Manual & get a check, as there are several Diagnosis modes. Looking at what you've written, it may be No.4 which is checking the wiring. Someone else may know more on this subject.

[brette10]

Thanks for the reply, #7 injector is the back drivers side, I can see that you can't get two one of the two screws, do you have to move the manifold over a few inches? there is a Brown metal pipe in the way going under the manifold (PVCsystem)?

The seat cleared it self up by disconnecting battery for 15 minutes (lan)

[Chally]

That brown pipe is the EGR pipe.Should be able to remove the EGR valve & loosen the pipe enough to move it out of the way.I have only worked on a RHD models, but I can't see why it still won't work for you.

Let me know how you went.