93' 240sx Auto to manual transmission swap wiring solution

[raynon2]

Hi. I have a transmission from an 89 or 90 240 that I am installing in my 93' (which I have heard is not a problem). I have the lower wiring harness for the transmission and I am wondering about how to hook up all the plugs. Some specific questions would be: do I connect the inhibitor switch plug from the MT harness to the one on the car? Would this work, or do I need to splice all the wires into the main harness? I've read some instructions on here about splicing the wires in but they are really confusing.

[Fastazz240]

ok so as far as the inhibitor plug its the one with just two wires on it what i did i took the plug snipped it down about 3 to 4 inches and then looped the two together. reason i did this is that if your in a suspect neighaborhood or worried about someone stealing it makes it difficult for someone to steal it. So once you get em looped to each other all u gotta do is plug it in to drive or take it out and it wont start. Cheap theft deterrent