93' 240 bogging down in low and high RPM

[smokin240]

Got a KA24DE(T?) and I don't want to replace thing after thing or take it to a overpriced mechanic to find the problem, so im hoping someone could help me on this? Maybe my air/fuel regulator? Maybe spark plugs and/or wires? Im not sure so any help would be greatly apreaciated, thanks all!-R :help

[Silvia007]

Mine does slight bogging at multiple RPM ranges. Turns out my plugs gap was completely off and each plug had a different gap. I changed my plugs with some Silverstones from http://www.nology.com and gapped it to .04 inches and no more bogging... but then I have a 6A MSD Box and SS coil pack. This shouldn't matter though if you don't have that setup. Just double check your plug gap and maybe replace the wires, cap, rotor, and while you're at it, replace the plugs, then run seafoam through the booster line, lastly, change the fuel filter. All this should cost around $100 bucks, mostly because the plug wires are around 60 bucks.

[smokin240]

Sweet thanks