90 pickup inner door handle

[thx569]

My side window is off it's track, and I'm opening up the inner door panel. The inside door handle and facia has no apparent fasteners that I can see. Any clues as to how it comes off before I break it to find out?

I'll introduce my sister to the first one with the removing procedure.

Pete

I've corrected the stated year

[RT22]

Okay the door handle that you use to pull door has 2 screws the door opening part the ring pops off. get a flat blade screw driver and pry real easy it will pop off and allow the panel to come off over the handle. Now the panel has plastic pop in pins all around the perimeter, 5 dollar forked tool from auto zone will pry those without breaking them. BUY the tool or you will bust the panel that holds them it is cheap board just stronger than card board. if this is not clear email me with a phone number I can call and explain better, have removed mine many times. [email protected]

[jdansmith]

Two of the three doors I have have a bracket on the bottom of the front window track with a spot wield that broke causing the window to be off track. I drilled a small hole through the wield and put a screw in. I
can post a pic if you like.

[RT22]

OHHHH I missed what he was asking LOL

[thx569]

Thanks Got it. Nice tight fit too. Didn't see the parting line.

Pete