91 SR20DET 240 Build

[5yk0s13]

Hey guys I started my car a little bit back and just never got a chance to post my build progress so here's the build so far.

91 Nissan 240sx HatchNissan SR20DET Red TopGreddy Rocker Arm StoppersCX-Racing FMICTurbo XS RFL BOVExedy stage 2 three puck clutchGreddy Turbo TimerAero Turbine Cat Back Exhaust180sx Type X Alloys 180sx Center Taillight

when I first got her home and got the stock alloys on it.

sitting next to my buddies old s13 and some other 240 guy that parked right by us.

trying on the new type x alloys

and after 10 hours of polishing

A month after I picked her up a deer jumped out of the woods and slammed into my fender.





popped it out a bit, but I'm gonna eventually get a new fender

and this is how I killed the KA (sorry for the quality - camera phone)

Haylie's new heart. Picked it up for $1600 from canada

[IMG]http://photos-f.ak.fbcdn.net/hphotos-ak ... pg[IMG]23K Miles

the new CX-Racing Front Mount

Starting tear down

My buddy Cole making room for the FMIC

Modified by 5yk0s13 at 10:18 AM 1/20/2010
Modified by 5yk0s13 at 10:21 AM 1/20/2010

[5yk0s13]

Only 23k miles on the motor



Checking placement before we mount the intecooler



starting to remove the KA



Old with the old....



What happens when you become too friendly with the rev limiter





...And in with the new



I couldn't have done this without these guys.



cleaned up the engine bay and stripped most emissions



finally got everything back together

More to come guys I'll keep the updates coming

[5yk0s13]

[pauliedrft]

i hope you dont do that to your sr it aluminum block (not cast iron ) and is more prone to stupidity.

[5yk0s13]

No I'm gonna be alot more mindful with this one.

[5yk0s13]

Exedy Stage 2 Racing Clutch on the way!!

[5yk0s13]

Got the new clutch in and she runs great. I was surprised at how natural it felt.

[Justin35ll]

Nice sr for 1600$. I paid 2000 for mine and it only has about 20k on it also. Internals looked mint like yours.

[centralflZ]

Where in Canada did you pick that engine up at? Do they have a online store?Thanks

[5yk0s13]

I found it on ebay for $1850 and talked him down to $1550 after the paypal fee it came to $1596.50. Jdmadvancemotors.com is their website. Their prices are pretty reasonable. Just make sure you get the ignitor and the correct MAF with the swap. They accidently sent me the SR blacktop MAF you need the 52F00 code if you go with the red top

[pauliedrft]

i have the exedy stage 2 clutch just wait until you fully brake it in 750 miles in town driving directly from exedy . but i will buy another one in a heart beat .

[5yk0s13]

I've had Exedys in all three of my 240s. This is the first stage 2 though and I love it.