91 Q45 power door lock will not release

A Q45 forum / Cima forum for the President of Infiniti's lineup. Brought to you by Infiniti Parts USA, your OEM source for Q45 parts!
vjackson
Posts: 1
Joined: Fri Jan 03, 2014 12:43 am

Post

My drivers side door lock will not release and i cannot open the door. I tried to remove the fuse but the door will not open. Can the door panel be removed with the door closed or does anyone have any suggestions? Thanks.


OwnerCS
Posts: 1771
Joined: Thu May 27, 2010 4:34 am

Post

If I could not get the door open with the external lock or the internal release, I think I would be faced with removing the driver seat then attempting door panel removal from the inside. I've removed my drivers seat recently and it wasn't hard.

User avatar
elwesso
Posts: 30810
Joined: Sun Feb 23, 2003 4:52 pm
Car: 94 Infiniti Q45t 5 spd
2007 BMW M Coupe
2007 Infiniti G35 S 6MT
Location: Indiana
Contact:

Post

You can't take the door panel off with the door closed.. IS the lock lever on the door feel like it's free (like it came detached inside) or is it stuck?

a lock smith should be able to pop the lock open from the outside, then you can open the door.

OwnerCS
Posts: 1771
Joined: Thu May 27, 2010 4:34 am

Post

Wes posted the better idea. My bad.

If you cannot get a locksmith to open the door, here are some pictures for discussion about door internals.

Image

The door lock control rod is under the red dots below with the green plastic stays.

Image

The plastic retainer to hold the control panel cover is notched as circled below. Be careful not to break it.

]Image

The armrest slides toward the rear of the car to expose screws.

Image
Here's a picture with the armrest removed to show the retaining screws.

Image

Here's a picture of the door retainers.

Image


Return to “Q45 Forum / Cima Forum”