89' transmission into s14?

[drftdvl]

Basically my friend just bought a 97' s14 thats automatic, and i have the an 89' manual transmission lying around from my swap. Will that swap into his car? thanks

[Onizuka]

I know the master repair kit for transmissions is the same 89-at least 96, so I know the gear sets are the same 89-98 manual. Im going to take a leap and say the bell housings are the same to. If this is true, then it will bolt on. However, there is probably some wiring that needs to be done regardless.

Sorry I couldnt be more of a help : )

[Structure240sx]

it will bolt up and will "work" the speed sensor fromt he s14 doesn not fit and the harness for the speed sensor from the s14 does not plug into the s13 sensor. i MIGHT be able to use the s13 sensor a solder the clip onto the s14 harness.

the s14 sensor "can" be sanded down aroudn the sides to fit into the s13 transmission but i dont know if its the same inside

[yellow_jacket]

The OBDII cars use a crankshaft position sensor that is located on the bellhousing. The S13 cars do not have this.

Will it work? Yes it will bolt up and mechanically function. It will NOT pass OBDII emissions. So it depends on the emissions test that they use in your area.