89 S13, S1 RB25DET, Power FC Code reading?
89 S13, S1 RB25DET, Power FC Code reading?
is there a way for me to read ecu codes or does the power fc even do that? ive never tried checking for codes before and i thought i should since my car doesnt start right now...
Re: 89 S13, S1 RB25DET, Power FC Code reading? (ANVIL)
do you have the hand held? It has a setting that lists all the sensors and what they are reading at that time. I don't have one anymore, or I could give you a step by step to it.
Re: (ANVIL)
its pretty easy to find then, I can't say exactly without one in front of me. But it says, "sensor check" or "sensor diag." then it pops up all the readings that the ecu is receiving. example MAF and ign and what not. Anything wrong will be highlighted.
-
silviasgp06
- Posts: 418
- Joined: Mon Apr 02, 2007 1:12 pm
- Car: 95 Nissan Zenki RB25 Powered
Re: (bauchrb)
sensor check it one way to look at it visually but the if your wiring is done correctly the PFC will flash the CEL just like the stock ecu if you short out the appropriate pins on the ECU connector. i dont remember what pins I jumped but i found it by using the search. but anything important is on the sensor check menu anyway.