7mgte injectors for ka24e-(almost)t

[bikerskater]

they are top feed and are 440cc and low impedance any know if the plugs will be just plug and play with resistors or if i would have to use the plugs that are on the motor and wire them up?(has anyone even tried these injectors before ? jw?)

[nelson8708]

Really need some pics to awnser that question. I dont know what the injector plug looks like so i cant awnser. Since you have to put resisters in anyways you might as well get some clip while your at it (assuming you are getting them from a junk yard). If they are like dsm or rx7 injectors all you will have to do is some slight modification to the injector plug and you can use the stock clips.

[bikerskater]

here some pics not that good but i hope you will be able to tell

[nelson8708]

not even close....you need the 7mgte clips. Those are closer to dohc clips than the sohc clips. Hit up the junk yard or ebay and snatch a set up. Any one with a dohc might be able to tell you if the ka24de clips would work. Either way you need different clips.

[bikerskater]

alright thanks i might go back to pick and pull and but im going to see if dohc was fit first