70mai dash cam connection

[Phifross]

Dear All,

I have bought a 70mai A810 4K dashcam with the hardwire connection in order to have the parking option.

I have connected the ground wire on the ground, no problem.
I have connected the VCC wire (red) to the transfer Shift fuse.
I have connected the ACC wire (yellow) to the cigarette lighter fuse.

When I'm turning on the engine, it's ok, the camera is on with no problem, but when I'm turning off the engine, the camera is also going off.

After that, I have connected the ACC wire (yellow) to the hazard fuse but it's same, the camera is going off when turning off the engine.

Can someone help to know how to do the connection in order for the camera to be on for the parking option please?

Thanks a lot in advance !!!

[mdmellott]

70mai has a website loaded with tech support.
https://help.70mai.asia/2282.html?lang=en-us
https://help.70mai.asia/2177.html
https://www.70mai.com/support/A810

[Phifross]

My question was more related to know if you feel that I connected the wire to the right fuse.

Of course I'm also in contact with 70mai to know if there is any camera related problems.

Thanks a lot !!!

[VStar650CL]

Vcc means a battery source on most devices, Acc means a switched source. It sounds like you have both connected to switched power.