5 Speed trans problem

ONLY for ADVANCED technical discussion about the 240sx!
Baldy
Posts: 5
Joined: Mon Dec 11, 2006 9:39 am
Car: 1993 240 SX Coupe - 5 speed and 1996 coupe automatic

Post

I have a 93 5 speed coupe - 5th gear becomes locked out periodically.One day I will have 5th and next I wont. It seems to change when I have parked the car put it into reverse. It is in gear but it wont ingage right away - when I start to let the clutch out it kinda falls into gear with a clunk and after that I am locked out of 5th. Help - I thought it might be the shift cuz it was real loose so I put in a short shifter and no change any ideas????


User avatar
ddgsxr504
Posts: 6024
Joined: Sat Jan 08, 2005 5:50 pm
Car: 1995 Nissan 240SX SE 2007 Infinit M35 Sport 2011 Nissan Pathfinder Silver Edition
Location: The real SoCal

Post

If everything works fine except 5th then the 5th gear syncro is prolly pretty much gone. Time for a rebuild or a new transmission!

User avatar
dickie
Posts: 16559
Joined: Tue Sep 06, 2005 7:55 am
Car: Killer Turtle

Post

for future reference general chat is NOT the place to put 240sx or technical-related threads like this. be mindful in the future, this is getting moved to 240sx tech.

Baldy
Posts: 5
Joined: Mon Dec 11, 2006 9:39 am
Car: 1993 240 SX Coupe - 5 speed and 1996 coupe automatic

Post

5th geear works fine when I can get it into the gear - like I said sometimes it goes in just fine and sometimes it doesn't.

User avatar
TougeMS13
Posts: 489
Joined: Thu Dec 09, 2004 8:09 am
Car: '91 coupe

Post

Was fifth a problem before the shifter install? Sounds like a syncro prob.

Baldy
Posts: 5
Joined: Mon Dec 11, 2006 9:39 am
Car: 1993 240 SX Coupe - 5 speed and 1996 coupe automatic

Post

yes - it would work for a day or two and then it wouldn't. Is there a possiblity of a nut working loose that would affect 5th and reverse?

I sometimes leave it in reverse overnite and when I go to back out it does not immediately start moving - it feels like it falls into gear with a clunk and then works fine. If I start out with the gear in 1st and then go to reverse it is OK.


Return to “240SX Technical Forum”