5 speed swap

ONLY for ADVANCED technical discussion about the 240sx!
datsunguy1984
Posts: 6
Joined: Sat Dec 15, 2007 9:29 pm
Car: 1996 240sx

Post

I do know that there is a write up on it but what i wanted to know is if i use a 5 speed trans and engine harness then do i need to run any wires? I have a 1996 240sx Thanks


User avatar
98s14inaz
Posts: 1069
Joined: Sun Dec 22, 2002 1:01 pm
Car: 2010 Nissan Titan Quad Cab

Post

In theory no. You need to make sure you are using a harness from the right car though or you may have problems. ie obdI 95 harness probably won't work right (cel's) in an obdII car 96-98. All s13's with the exception of the sohc (not sure) should be the same harness or pretty damn close.

User avatar
Snott Rocket
Posts: 34
Joined: Thu Dec 13, 2007 4:29 pm
Car: 1991 240sx, 1986.5 Toyota Supra, 1974 Corvette, 1962 Rambler Classic 400

Post

If you use the trans harness would it be necessary to use the MT ECU as well?

auto alchemist
Posts: 137
Joined: Tue Feb 08, 2005 3:11 pm
Car: 1992 nissan 240sx se

Post

Snott Rocket wrote:If you use the trans harness would it be necessary to use the MT ECU as well?
its recomended that you use the mt ecu, but i ran the at ecu in my 92 s13 for a while after i did the 5 speed swap and didnt have any problems, but im not sure whats different about the ecu's, you may want to ask someone who knows about ecu's about that


Return to “240SX Technical Forum”