5 LUG CONVERSION S14 TROUBLE HELP PLZZ!!!

[gian52]

k guys i ran into a bit of trouble today tryin to do my 5 lug conversion.. so i just got the 5 lug hub so when am removing my hub i got stuck on 1 point.. on the hub where it connects to the bushing in the bottom it does not come off no matter what i hammeered that thinig 2 death jacked up everything i dont know wut to do plz help!!!

[verSat1l3]

Front or rear? Is it the ball joint? Not too sure what you are referring to. If its the ball joint you might need a spreader.

[gian52]

its in the front yea its the ball joint

[gian52]

Whats a spreader?? cause i had used those pliers that remove the seal ring lookin thing but it still didnt come off

[verSat1l3]

Its basically a pickle fork. It looks like a two pronged fork that goes around the ball joint and you use it to pry/wedge upward. They also use them to separate tie rod ends from the steering knuckle. You can get a kit with 3 sizes for $40 at Sears and singles at the auto parts store for whatever they cost...

[gian52]

alright man thanks alot ill check it out tomarrow