400-500whp SR20DE+T

For discussion of front-drive SR20DE, SR20VE and SR20DET engines!
Schumy
Posts: 3
Joined: Sun Aug 12, 2012 2:46 am
Car: Nissan primera p11 GT

Post

Hello my new friends i`m new on this forum and this summer i want to fully built my engine and i want yours opinion about my sr20det built,and opinion from the person which have did this.

I want to put on the wheells around 400 500hp at max 7500rpm on my Nissan primera p11 GT and i want to know if i can with this list of parts:

86.5 cp piston 9.0:1 cp
eagle rods
740 or 850 injector i don`t know which is best? and wich will fit on my intake ?
initialy GT3582R but the pecision sc6262sp is a little cheap but whitch spool faster ? and the .64 A/R is perfect for street use?
z32 MAF
44mm tial wastegate
custom 3 inch exhaust
jwt s3 cam
cosmetic headgasket
the stock oil pump is good?
is necesary oil squirters?
acl race rod bearing and main bearing

The engine will be drive daily with more street race, for this type of drive the turbo i want to spooll fast and hard and i want to know if the .64 A/R (on t3 or t4?) is perfect for me.

I wait yours opinion and advice for my engine built.

SORRY FOR MY BAD ENGLISH!!


compactfean
Posts: 2602
Joined: Thu Dec 03, 2009 10:28 am
Car: 89 240sx s13 sr gt3071r 23psi
B14 sentra ser sr20de-t 7psi
daily
Location: reno nv

Post

First off will you be running pump gas? Highest hp I think I've seen on 93 oct was 400 something. Also the 6262 hands down outspools and out performs the gt35. Trust me on this! I've done tons of research on this turbo and is an absolute monster! You do know its a 700+ hp turbo right? Id recommend the t3 64 a/r. The 82 actually falls out of boost in 4th gear unless you are stroker kitted or automatic (or nlts on a manual and I will be experimenting with this soon) to run that turbo at 25 psi you will need 850cc injectors minimum. Id actually run 1000cc injectors which would give you the head room for 30 psi (if your maf isn't already maxed out) I actually think pte's smaller turbo would better suite a z32 maf.


Return to “SR20DE / SR20VE / SR20DET Forum (front drive)”