370z rims

[kratosmack]

So does anyone know if the 370z rims will fit a 2011 a/c? I searched through the past posts and the consensus is that I'd have to buy 4 front rims because the back rims are bigger as the 370z are staggered.Does anyone know per say or know anyone who has done it? Thanks

[SanoSuKe]

Those wheels come in with those specs: 19x9 +47 front, 19x10 +30 rear

Some people like to run square setup on their coupes but that doesn't mean you can't run staggered.

It will work %100 with no issues, however, I do recommend that you use a 15mm spacer for the front. So your fitment won't be too sunk in. It would look nice and flush.

[kratosmack]

Yo Sano when you got your Konig afterburners what tires did you get with it 235/40/19? and did you need spacers or nah?

[SanoSuKe]

My Konigs were 20s and the specs I had don't fit the "functional" altima coupe category lol.

[kratosmack]

lol If you going for functional would you go with 19s or 18s for the Konigs? I fell like 18s might look too small

[SanoSuKe]

18s are definitely too small. I only run 19s on my car now.

[kratosmack]

So if i go with the 19x8 +30 offset afterburners for my car. Do you think i should get spacers or will they look good as they are?

[SanoSuKe]

Should look good I think. Might night a 5mm spacer in the rear to make it sit flush.

[kratosmack]

if i get 18x8 rims with + 42 offset, should i get 5 or 10 mm spacers all around?

[SanoSuKe]

10mm even 15mm would work

[kratosmack]

Yo San do you think 1100 is too much for 18' afterburners ?

[SanoSuKe]

Yo San do you think 1100 is too much for 18' afterburners ?

I'm surprised you found a set in 18s! Honestly, I think it's an ok price. I dunno which one you're looking at but make sure they are as listed. Some people list those wheels as Black/neochrome when it's actually chrome faces/neochrome lips

[kratosmack]

Found out they were 5x100 FML . The person selling them said i could get them re-drilled and lowered the price to $700. do you think its worth it?

[SanoSuKe]

Found out they were 5x100 FML . The person selling them said i could get them re-drilled and lowered the price to $700. do you think its worth it?

Nope, not worth it. I'm not a fan of messing with the wheels at all.

[imcTJ]

Has anybody put 370z rims on an Altima Coupe?? 18's or 19's running a staggered setup? Worried about the back sticking out... Thanks

[kratosmack]

I was gonna do the same thing with 19s like I posted above. It depends on the offset. If Its lower that 30+ it will stick out. A 30-35 offset will have your wheels sitting nice and flush