370cc injectors...

[w1ngzer0]

where... I have looked at all the stores on the left column but everyone carrys 550cc injectors or bigger.

[yashin]

for what engine?

[w1ngzer0]

top feed injectors

its for a ka24de

ewwwwwwwwwwwwwww you ahve 666 posts get away!!! You know im just playing around right??;)

BTW i was looking at radiators and i couldn't see any differences between the SR20 and the KA24 radiators provided. Is there honestly any differences?

[Rex]

Some for sale in B/S/T right now.

[w1ngzer0]

is there not a "store" that i can buy it from?

[Rex]

Phase2motortrend lists them as part of Greddy S14 KA24DE TD06 Bolt-On Turbo Kit, but doesn't list them seperatelt. Give them a call?

Also you might check with Chris at Underground Motorsports.

Both NICO sponsors

[w1ngzer0]

is the ka24 high or low impedence ?? and don't worry im not installing these parts :P

[Rex]

A search in the KA forum says high impedance for a 90 240.

[toki]

DE is side feed stock

[IveBeenBad]

the difference in the radiators is that the KA inlet is on the pass side and the SR is on the drivers side.

[w1ngzer0]

DE is side feed stock

then i guess ka24de.com is selling the wrong injectors :rolleyes

[IveBeenBad]

then i guess ka24de.com is selling the wrong injectors :rolleyes

hes right... DE are side feed and E are topfeed... if i had my digicam id take pics.

[w1ngzer0]

MSD Top Feed High-Impedance 50LB/HR Fuel Injector:

These MSD injectors are high-impedance (12ohm saturated circuit), and have a 50lb/hr static flow rate at 43.5psi. They also come with a packet of silicone dielectric compound to lubricate the o-rings prior to assembly. Furthermore, these injectors have independently been flow-matched and grouped (sets of 4) to tighter tolerances than factory to assure maximum consistency and performance. They are universal size, and require an aftermarket fuel rail such as JWT or similar to fit into the KA24 or SR20. These injectors are currently in stock and ready to ship.



like i said. Someone needs to let ka24de.com know he is selling the wrong injectors then

[IveBeenBad]

MSD Top Feed High-Impedance 50LB/HR Fuel Injector:

These MSD injectors are high-impedance (12ohm saturated circuit), and have a 50lb/hr static flow rate at 43.5psi. They also come with a packet of silicone dielectric compound to lubricate the o-rings prior to assembly. Furthermore, these injectors have independently been flow-matched and grouped (sets of 4) to tighter tolerances than factory to assure maximum consistency and performance. They are universal size, and require an aftermarket fuel rail such as JWT or similar to fit into the KA24 or SR20. These injectors are currently in stock and ready to ship.



like i said. Someone needs to let ka24de.com know he is selling the wrong injectors then

they are for use with an aftermarket fuel rail

[w1ngzer0]

im tired don't mind me :rolleyes