350Z/G35 brembo brakes fit on 180SX?

[JDMSIL80]

I have a right hand drive JDM 180SX, and am wondering if those gold brembo's would fit on the car.

Thanks!

[barrigas14]

yes they will fit...but the hole size on the calipers is like 2mm bigger. so you have to drill out the holes on your mounting spots or get some spacers to fit inside the caliper holes.

[JDMSIL80]

Would the rear calipers from the 350Z/G35 fit also?

What is the optimal rotor size to go with? I am running 16inch wheel.

Thanks!

[barrigas14]

you have to use the rotors that the G35/350 use. you might be able to build smaller rotors but that would be a waste of time and money. plus i don't know if that would work.

you can't use 16" wheel with this setup. the rotors and calipers won't clear.

the rears don't work...last i read it is something about the mounting ears being off. you might be able to build a bracket but it isn't like the fronts.

the Sentra Spec V brembos work too.