305 v8 into a 240sx s13

V8 240sx? Sure! If either the chassis OR the engine is non-Nissan (i.e. SR20 in an RX-7 or LS1 in a 240sx), we've done it.
bob777
Posts: 15
Joined: Mon Jan 05, 2009 8:35 am
Car: 1993 240sx coupe

Post

What would i have to do fabricating wise for the swap i have the motor and trans and everything else


User avatar
matafied
Posts: 423
Joined: Mon Jan 08, 2007 8:15 am
Car: 1989 240 rb25det 1992 240 rb25det

Post

this should awnser some of your questions

zer...age=1

bob777
Posts: 15
Joined: Mon Jan 05, 2009 8:35 am
Car: 1993 240sx coupe

Post

Thanks man gave me some ideas did you cut your firewall or hammer it?would it be easier for my to buy an r33 crossmember

User avatar
matafied
Posts: 423
Joined: Mon Jan 08, 2007 8:15 am
Car: 1989 240 rb25det 1992 240 rb25det

Post

i just hammered it, as for the r33 crossmember idk but it worked out awsome for me

bob777
Posts: 15
Joined: Mon Jan 05, 2009 8:35 am
Car: 1993 240sx coupe

Post

im going to buy a r33 crossmember for $109.99what motor mounts did you use?I just almost finished builing my motor.How many inches did you hammer your firewall?Did you use a automatic trans?

User avatar
matafied
Posts: 423
Joined: Mon Jan 08, 2007 8:15 am
Car: 1989 240 rb25det 1992 240 rb25det

Post

bob777 wrote:what motor mounts did you use?

How many inches did you hammer your firewall?

Did you use a automatic trans?
made my own mounts. i only hammered it in about 1 inch, also i am useing a th350 auto trans

User avatar
Jon FLA
Posts: 102
Joined: Wed Aug 05, 2009 5:20 am
Car: 1994 Convertible 240sx
Location: St Petersburg, FL

Post

is there any place that sells a mount kit? or would you have to fab your own?

User avatar
matafied
Posts: 423
Joined: Mon Jan 08, 2007 8:15 am
Car: 1989 240 rb25det 1992 240 rb25det

Post

http://www.mckinneymotorsports...240sx


Return to “Hybrids”