300ZX Z32 Motorized trunk lid opener

The Nissan 300ZX (Z32) general community discussion forum
300ZXtt2+2
Posts: 2
Joined: Fri Dec 01, 2017 1:23 pm
Car: 1992 300ZXTT 2+2 IV, silver, bourdeaux leather inside,.

Post

Hello to ALL
I am Jose and I am located in Portugal, and I need some help from one of you.
Anyone have on his 300Zx the rear trunk lock latch motor actuator opener ?? I need pictures where is installed the motor frame. Thanks in advance.


User avatar
NolimitZ32
Posts: 7042
Joined: Fri Jun 27, 2008 9:07 am
Car: 91 AG2 2+0 TTMT swap/E39 BMW 540i6/E53 4.6is Dinan S3
Location: Houston, TX

Post

Welcome to NICO Jose. I have to say I've never heard of such a thing, but sounds like a cool idea. Hopefully someone can help you out.

One thing you may look at is getting some structs that are higher pressure than the factory ones so that once the hatch is unlatched from inside the hatch will just open on it's own, may need to look at something progressive to make sure it doesn't bounce open.

300ZXtt2+2
Posts: 2
Joined: Fri Dec 01, 2017 1:23 pm
Car: 1992 300ZXTT 2+2 IV, silver, bourdeaux leather inside,.

Post

Dear Nolimit,
Thanks for your message. This motorized actuator seems was available after 1994 and only for USA and Canada, part number 90550-48P01 https://www.nissanpartsdeal.com/parts/n ... 48p01.html
About those higher pressure trunk struts, is a nice idea when open but not so good to close ;). what i want is to do not need to use the car Key or go inside the car to open the trunk, and i see a good idea to use a original part, and be controlled by the car alarm remote control,i hope someone here have this same motorized latch control and be able to share some images to identify where to install it, as was done at factory.

User avatar
Ace2cool
Posts: 11650
Joined: Sun Apr 20, 2008 5:21 pm
Car: 1991 Nissan 300ZX TT
1966 Datsun Fairlady 1600
2005 Suzuki GSX-R 600
1974 Honda CB550 Four
2009 Ford F150 Lariat
Location: Murfreesboro, TN

Post

It appears in that IPB to install directly to the driver's side of the trunk, with the actuating arm connected to the key tumbler. I've never had one on any of my Z's or friend's Z's, as remote entry alarms were rare back in the day, haha.

User avatar
DCaff300ZX
Posts: 4202
Joined: Sun Jun 14, 2009 8:18 am
Car: .
1993 CRP TT- Modified
Location: Tacoma, Washington

Post

300ZXtt2+2 wrote:
Fri Dec 01, 2017 3:38 pm
Dear Nolimit,
Thanks for your message. This motorized actuator seems was available after 1994 and only for USA and Canada, part number 90550-48P01 https://www.nissanpartsdeal.com/parts/n ... 48p01.html
About those higher pressure trunk struts, is a nice idea when open but not so good to close ;). what i want is to do not need to use the car Key or go inside the car to open the trunk, and i see a good idea to use a original part, and be controlled by the car alarm remote control,i hope someone here have this same motorized latch control and be able to share some images to identify where to install it, as was done at factory.
Wow, that's a pretty cool option and DEFINITELY not one I have ever heard of or seen, obviously.
OP, if you get this working be sure to post it up! :dblthumb:


Return to “300ZX (Z32) General”