300zx NA 5-lug hubs on s14

[Dazzla]

I have a 4-lug s14. I'm going 5-lug and deciding which route to go.

- Can I run 300zx NA 5-lug hubs front and rear? What do I need? Just the hubs with pressed in bearings and rotors?- Can I run s13 5-lug in the rear, and then get s14 hubs for the front?

[numbnuts240]

what is this s13 5-lug that you speak of?

[Dazzla]

Like s13 5-lug hubs...I think the rears are the same for s13/14. Just wondering if 300zx NA hubs will fit front and rear, or either...

[numbnuts240]

just the rear n/a 300zx hubs will work. for the fronts i'd say just find some off an s14.

[Dazzla]

Oh ok, so its the same thing if I get s13 5lug hubs for the rear or 300zx? Just the hubs/bearings/rotors is all I need for either right?

[numbnuts240]

sounds right. if you were local i'd set you up with my old 5-lug rotors since they're just sitting in my garage collecting dust. and surface rust lol.

[blacksrjdm]

Oh ok, so its the same thing if I get s13 5lug hubs for the rear or 300zx? Just the hubs/bearings/rotors is all I need for either right?

There is no such thing as a factory s13 5 lug car. If you are taking the 5 lug off of an s13 then it is from an s14 or z32 or j30. Nissan never installed 5 lug hubs on s13 cars here or in japan.

And by now you should know the search button like the back of your hand with all these "how do i do this" threads.

You have an s14. Get s14 front and rear hubs, get new bearings pressed in them and install. Or just go to the junkyard and take them from a 5 lug s14. Or buy ichiba hubs. But for god sakes stop saying s13 5 lug. s13's were all built utilizing 4 lug hubs.

[numbnuts240]

that's what went through my head at first. but then i just assumed he was talking about aftermarket conversion hubs.

[OutToWinPAHC]

Its been covered time and time again.

Seach works, just type 5 lug conversion and select the 240sx topic instead of all.

You need S14 5 lug hubs in the front, and S14 or Z32 NA rear hubs (same).