300zx N/A dyno chart

[Gerry car guy]

Wonder if anyone has a dyno run of a n/a .. "without mods', my dyno run shows that the HP goes flat from 5200 till about 6000 and then starts to peak again from 6000 to 6300 at 150 RW HP

The Torque take a dive from 5200 till 6000 and shows a similar peak as the HP climbing from 6000 to 6300, torque about 130 Lb/Ft

The torque curve is essentially flat from 2800 RPM till 5200 with a mid dip at 4200 wich might be contributed to the varible valve timing

Plugs, coils, fuel filters, fuel pressure, ignition timing, fuel octane are all good.

Any help would be great
Thanks
G

[Ace2cool]

There's a chart on the first page of this:
project-slicktop-t235095.html

He mentioned something about it as well.

[serg-z32]

... didn't it blow up or something?

[StockTurbosFTW]

You need boost...