300hp to the wheel???

[evotech240sx]

i was woundering if n-e body here has a 300 hp to the wheel 240sx??? im planning on doing 300 cause thats what i want on my 92 ka24de..... (let alone i have an auto) but that doesnt matter to me. i have already a t3/t4 turbonetics turbo. im about to buy a forge aris race pistion that will make my compression to about 8.8.... i dun really know what else i need to do to get my car to that hp figures. what else have you guys done to your car to make it hold 300??? cause this is also gonna be daily driven as well. thanks for all the info guys.

misc parts: i have an injen cold air intake, hotshot headers, denso spark plugs, nology 10.5 mm wires (with pre grounds in them), 2 1/4 pipings all the down with a high flow cat, and those 4 gauge ground wires ( they work great with the ideling and music ), drill & slotted rotors, 17's with 215/45/r17s.

http://www.teamevotech.streetracing.org ------> look for mike

[Charlie240sxt]

Well i dont know with that J-spec Ka you got running in your 240 but the stock ka holds 300whp fine sreach around but pistons and a good rebulid is about all you need to hold 300whp for years of boosting fun. Swap your self a 5 speed why your Aat it too.

[huguetpj]

"J-SPEC KA24DE eng." -> :shocked2 :slap :evilhaha

[Drift Machine]

Heh. Where did you pick up this J-spec KA? But anyway just look at the KA-T owners list, a few guys on there are putting out over 300hp.

[Structure240sx]

tunning is all you need

[Jimmyg41]

tunning is all you need

Balsphemy...J-Spec KA tunes itself.

[WDRacing]

I've been looking for one of those Jspec KA's for like 6 years now. I'm so jealous...

[RedHatchback]

J-Spec KAs came in Nissan Largo's I think....I could be wrong..They were made for a couple of years though

[evotech240sx]

its okie if u guys dont believe me....... its okie with the jokes.... i dont mind.... but when i blew my frist ka24de..... i went to my boys motor store and asked him for one...... he told me there was one coming in from japan. i dunno how and why it was in japan. but all i know is that it came from japan and now its in my car. so ya..... so proper tunning and all is all i need??? thanks for the info.

the auto thing..... no thanks.....when i finish with the turbo. im gonna give the car to my wife and start with another car. and she doesnt really care about auto or manual so thanks though.

[TrunkMonkey]

the only jdm KA is the ka20de, and as far as i know, no one stateside has one.

-demetrius

[D-UNIT]

Haha pretty funny!! To bad all KA's and all 240's ARE MADE IN JAPAN!!!

[GEO]

Hot shot headers arne;t gonna work witht eh turbo kit..

[MikeMurphy]

Haha pretty funny!! To bad all KA's and all 240's ARE MADE IN JAPAN!!!

Does that mean that they KA is a Japan Domestic Market product?

Nope. Sorry.

[evotech240sx]

i know that hearing about how my motor came from japan is kinda funnie..... maybe the guy who my boy bought it from..... he bought the motor from here a long time ago??? and did somethings with it or maybe wanted to see how the ka was like???? i dunno...... all i know is that it came from there. i dun really know the whole history on my motor. my homie put that on the web site cause he thought it would be funnie. but oh well..... sorry for asking u all these question n-e ways. but thanks geo.... i already know my hotshot headers are not gonna work with my turbo set up.

[EazyBreazy]

you guys are f-in ruthless

[Red-KAT]

Who the hell cares where it came from? Or where it was built.

You people drool on Japanese **** to much.

EDIT: NM i'm stupid... You an A/T

[GEO]

yeh, 7psi daily is great for stock stuff

[:: orion ::]

So is 12psi...hehe.

- Brian

[D-UNIT]

Does that mean that they KA is a Japan Domestic Market product?

Nope. Sorry.

I never said they were JDM. I said they were J-SPEC!!!! Get it.

[D-UNIT]

as in MADE IN JAPAN!

[TurboKA37]

as in shut the hell up cause this is the biggest waste of bandwidth ive ever seen....and now u made me add to it! damnit

[evotech240sx]

running at 12 psi??? how much hp does that put out??? im not really too sure how much psi i wanna run. cause i wanna have 300 to the wheel. how much do u think i will have to run it at??? and i think this thread should just stick with the hp figures.... forget about the j-spec ka or some shiet. u guys are making such a big deal about it. its okie...... just let it go.....

[TrunkMonkey]

as in shut the hell up cause this is the biggest waste of bandwidth ive ever seen.

i agree.

-demetrius