3.5 Stock HP at the wheels?

[dangeris]

Just like the topic says, does anyone know the stock wheel horse on the 3.5? I know it's rated 270 horsepower and 258 lb-ft torque but that's usually measured at the crank. I wanna know the true numbers at the wheel.
Modified by dangeris at 9:04 AM 2/2/2009

[marlin29311]

LOL at the title of your thread Dangeris - it's 0!!! FWD!!!

anyway...if my memory serves me correctly I believe that the number is around 220-230 hp @ the front wheels - this is coming from discussions I've read around here, so it might not be exactly accurate...

[dangeris]

Yeah Marlin, After I posted it, a minute later I was like It's not rear wheel you idiot! So I hopped back into the thread to change the title and content to reflect that. I knew some one was going to say 0 though... I'm such a pineapple sometimes

[bhs07c]

Well, I guess if you really wanted to know you could do a Dyno..for the most part though you can estimate it..if it's stock 270, 30 of it is probably lost considering the weight and engine of the Altima..240-245 at the wheels? lol just a guess

[07wHiTE 3.5SE 6sPD]

my 6spd 3.5 dynoed 241 whp uncorrected and 249 whp corrected. this is with injen intake and stillen exhaust around 75 degrees F.

[dangeris]

Thanks for the numbers guys. Living in the stick, there's not a lot of places here that has a dyno. I'll search for one around here and see. Do you guys know / remember how much it cost you and how many runs they did?

[marlin29311]

You're still going to be hard pressed to dyno the CVT...how come you're looking at all this?

[dldjros69]

x2 what are you doing?

Id like to know the 2.5 whp.

[08altima35]

90 degrees at a hair over sea level the stock 3.5 coupe puts down 220- 230.