2nd ECU FRIED!!!! WTF!! Please help

[Naloos13]

So i have a sr E5 ecu that friend a couple weeks ago, so i went ahead and saved all my pennies and found a new Tomei tuned ECU. Anyway i got it in and it worked awesome until another wire shorted out. So basically im out of money and with a car that doesnt go anywhere. Does anyone know of a place that can diagnose and repair an ecu? I have searched online but everything that comes up is out of the US.

thanks

[CoupedUp]

I think its gonna be your wiring. If you did it yourself. Pull it and run through it again. Check all solder joints.

[Naloos13]

Yea, some of the insulation had come off some wires, but i need some place to repair the printed board. Can that even be done?

[CoupedUp]

Man, if the connections delaminated it will be tough. The resistance may have changed in the board. Good luck.

[Geno750]

The only person I'd say that has the know how for what your asking is Chris Epstien of RSenthlapy. That guy is a wizzard with sr20 ecu's.

[Nismotouched]

electricall nightmares...I usually hand off that part off to someone else

[T-rev]

heres my thread from a couple months back, it was the maf shielding wire shorting out the maf +12V power.

I recently I had a coil pack die on me, turns out it had been 1/2 assing it all along, so it could have been the a buggered coil pack.

zerothread?id=265103

[jubee]

Yo if you need your ECU checked/Repaired hit me up i may be able to help. I work on Medical/PC/Phone/ECU pretty much everything, thats what i do for a living.

Email is [email protected]

shoot me a email and we can talk more.