$2k sub 13 sec s13 project

[Structure240sx]

Got this car super cheap and have decided to make a little project out of it. i want to run 12's with it for under $2k. heres the list:

1990 auto s13 auto hole in block(pulled yesterday) $150 plus $65 tow = $215

Goodyear 28x10x15 slicks on mustang wheels = FREE

sohc turbo manifold = $165 shipped

Super 60 t3 brand new/rebuilt = $265 shipped

160k mi sohc engine and 5spd transmission = $2005spd swap parts =$65spec stage III used disc see how far this gets me = $FREEFMIC, DSM bov, oil lines, boost gauge coming = $245 shippedrx7 550cc topfeeds on the way =$125 shippedsilicone coupling found in my garage enough for piping = $FREEIC and Downpipe estimate piping including flange = $75misc. = $100

have sold:shroud $15interior should be today $100 maybea/c system if that sells maybe $100+parting out kae hopefully ?so maybe $300 subtracted from the cost

so right now im under $1200 so maybe i will just get a new clutch kit to play it safe. with the interior stripped out and boosting a good 15psi on this turbo it ought to be fun. for management im either going to do a sorta y-pipe intake kinda like a hacked maf or jsut put on the extra safc i have. see how the afr's and if needed a fuel pump. should be getting done within a month or so after my car is in SEMA

[Florida240sx]

Very nice, where did you get that mani from?

[Structure240sx]

found a guy selling it on ka-t.org and 240sxforums. hes not sure who made it as his friend had it for about 4 years, maybe a gladmann original?

[DRIFTEADOR]

good luck. thatd be ****ing awesome if it works.

[WDRacing]

Weld the diff, DIY water injection, keep the auto, buy N2O. If you have enough cash, send the stall convertor out and hav it stalled up to 3500. Should be about 350 through precision industries. Then buy a transmission cooler and roll on 2 baby.

[hannibal]

Cool project.So does this mean the S14 is 'finished'?

BTW, I thought 4 lug Mustangs had a different bolt pattern. I dont know how they got those wheels on there...

[nismofly]

Jordan might be able to tell you about the mani

good luck

[Craving4Boost]

structure has a fetish for red cars

[214kka-et240sx]

were did you get the rx7 550 injectors cause i am looking for them for my ka-et if you have part # please tell me or any links i can get them thank u

[hannibal]

See sticky at top of KA-T forum. I put that together from info I found on the net, so all the part numbers may not be correct, but its a good palce to start...

EDIT: Didnt realize there were no part #s listed. The complete spreadsheet can be found here...http://wes.spilky.com/injectors.xls

[gabossie]

wow, that sounds like fun. Lets see how that 160k engine holds 15psi I think the DIY water injection might not be a bad idea.

[TheOne]

kool......a lil fun time till yours is actually running fine,lol.

get some vids, i wanna see that car lifting the front tires:).

[LEMHEAD16]

Thats almost the same as my set-up i am building fro my daily driver except not as much boost and I am running an Emanage. Good luck to you!

[Structure240sx]

WD not bad idea about the stall, a local place will do it for $300 iirc, better than breaking in a new clutch imo

S14 is nowhere near being finished, this is jsut something new to mess with rather than getting a bike ill kill myself on

you are right about the mustang wheels. i wanted them on so bad i made some "modifications" to them

got the injectors off ebay with harnesses

my car is actually running great, very strong very fast

thanks

[D Money]

15 psi on hacked maf you got a great deal though, its a nice looking car too. i think you can do it

[NateDogg]

Im glad you got an S13 rather than a bike. You are a great NICO member and I look forward to having you around for a while yet!

Good luck on that. I hope you dont shred the tires on the fenders though. maybe needs some 'custom bodywork' sponsored by sawzall?

[S14tat]

structure when your done with it, you gotta take me for a spin in a 2K 12 second pig nose.

[Structure240sx]

yes i will definitly be pimping the fenders

tat- i guess the ride in my car with 10x as much money into it running 12's wasnt enough? come on now 110 past that off duty cop that followed us even after i turned around. and ou still need more, geez

[hysteria]

yeah there's something about beaters putting down power that's just funny... i'd love to be in that car when it smokes a $40k+ sports car... it' just funny. people get mad. lol.

[S14tat]

yes i will definitly be pimping the fenders

tat- i guess the ride in my car with 10x as much money into it running 12's wasnt enough? come on now 110 past that off duty cop that followed us even after i turned around. and ou still need more, geez

that was such bad luck that we had, who would've known that a hyundai would have a cop in it goin to work? alright i can understand where your coming from too, but that S13 will be pretty bad *** when your done with it i'm sure of it. do you think it will be faster then your car running 15 psi that day?

[Structure240sx]

nah i think my car still was a lil faster, the turbo hits harder than this one will

[SirTwix]

where did you get the turbo?

[Structure240sx]

from a guy on the ka-t.org forums, he is now sending me the FMIC, dsm bov, oil lines and a boost gauge for a killer deal IMO

[preston240sx]

hey hows the transmission in that car would you wanna sell the auto ??? my went out yesterday in my daily driver ? give you 100 -125 for it even pick it up lemme know thx

[Structure240sx]

yea i think i replied to a different thread of yours.

i kinda want to keep it auto now. it is still up in the air because i have a complete 5spd swap and the auto.

for $300 ill sell you the 5spd swap and if you come to pick it all up ill throw in a used spec stage III clutch disc

[preston240sx]

hey just lemme know what you decide to do aight i kinda need the auto transmission it for my daily driver so i kinda need it soon.... lemme know what you decide ... if you know any one around ur way or on here that has one lemme know aight we can always talk price thx

[Structure240sx]

preston- still think im gonna keep the auto, let me know if you want the 5spd swap

here's what came in the mail today

[GEO]

How tall is that intercooler?

[Structure240sx]

roughly 6" or so

[bigk]

good to see that your putting my old manifold to good use.