2jz, rb25, 1jz, rb26

[chaosnite]

just your best guess.. I know the RB25, RB26, and 2jz have been done- not sure on the 1jz. But assuming the toyota motors can be swapped in easily, which motor responds the best to simple mods- or in other words easiest and/or least expensive to hit ~500hp.

[undertaker]

an aussie put a 1jz in his S13 silvia, sacrilege i'd recommend the larger motors for this output but i don't know much about upgrading toyotas.

[Redline240]

2JZ responds really well to simple mods, and its quite possible to get 450hp on stock turbos. Mind you its also possible to get over 400hp from stock turbos on a RB26 and thats nissan power!

Redline

[Jamison]

do you have a write up on the 2jz swap into a 240? or do you have a site?

[chaosnite]

I'm assuming you're asking Redline240 on that one.. the only one on these boards that I recall was considering a 2jz swap was Cyris3d and I remember reading Meggala was considering doing a 1jz swap. However, a search on Google came up with at least some shops that say they could do it ($$$$$) or have done it.

[chaosnite]

how much would it cost to buy the stock rb26 stock internals? seems pretty cost effective though I don't think I could build the engine myself.. I suppose the toyota engines would require custom mounts? Is the 2jz about the same measurements as the RB26? Wouldn't want to throw off the car's balance or anything..