2500-3000 rpm stall

Discuss topics related to the CA18DE and CA18DET series engines.
psykodevul
Posts: 2
Joined: Wed May 30, 2007 8:00 pm
Car: 1989 240sx ca18det swap

Post

Just swapped in a ca18det and finally got it running after realiasing that 2 plugs were backwards now thats ok but it will start idle just fine but won't rev and i cannot figure out why. Dont know if the vacuum lines are hooked up right i am not running any smog equip. so any thoughts or knowledge would be greatly appreciated.


User avatar
The_Chosen_One
Posts: 1664
Joined: Tue Oct 17, 2006 2:05 pm
Car: 2009 Subaru Impreza 2.5i
Contact:

Post

check the MAF, its 99% of the time the maf if you cant go higher than 2500rpms.

psykodevul
Posts: 2
Joined: Wed May 30, 2007 8:00 pm
Car: 1989 240sx ca18det swap

Post

I just gor the engine how do you test a maf? and if that is bad is there any car i can yank one from the junk yard? Or do i have to order it from a store?

User avatar
capowered240
Posts: 483
Joined: Tue Apr 05, 2005 5:41 pm
Car: 90 240sx

Post

If it is bad, and if you have a stock ecu then you can use a mafs off of a kae motor. Just like the_chosen_one said, if you can't rev it past 2500 then its usually the mafs.


Return to “CA18DE / CA18DET Forum”