24e to 24de wiring question

[o_alcha3]

i am about ready to put a ka24de in my 89. i have a wiring harness but the wires to the gauges are cut. I have enough to cut and crimp. Are the colors that same from the two ecu wirings. If not where can i get a diagram.

[Dattebayo]

try hitting the button. Top right of the page.What year is the engine?

[o_alcha3]

the engine I am installing is a 95' OBD1 and i am pulling my sohc 89'

[Dattebayo]

You have to change out alot more than just the wiring. Please use the search button to find the thread.

[godspeed]

you know what, if you can find anything with the search i would be happy to know, b/c i have been looking for it and can't find it, all i find is that you will have to match the wires and leave the rest, i have seen that unstable-hybirds has a write up, to bad they don't have a site anymore, or at least i can't find it. so if anyone has this post anywhere where there is a right up on the ka24e to ka24de swap, then please let me know

[godspeed]

ok, took me a long time to find but i found a good write up about it, here you gohttp://forums.nicoclub.com/zerothread?id=78205